About

My names Matt, I live and work in Manchester, UK.

Some older stuff I have done is available on instructables:

http://www.instructables.com/member/%7D%7Bitch/

Unless otherwise stated everything on this blog can be assumed to be under a Creative Commons Attribution-Non-Commercial-Share Alike 2.0 UK: England & Wales Licence.

Creative Commons License
This work is licenced under a Creative Commons Licence.

<a rel=”license” href=”http://creativecommons.org/licenses/by-nc-sa/2.0/uk/”><img alt=”Creative Commons License” style=”border-width:0″ src=”http://i.creativecommons.org/l/by-nc-sa/2.0/uk/88×31.png&#8221; /></a><br />This work is licenced under a <a rel=”license” href=”http://creativecommons.org/licenses/by-nc-sa/2.0/uk/”>Creative Commons Licence</a>.

3 responses to “About

  1. Interested in assisting you in development of the 3D scanner project, I work off OSX, own a reprap mendel and I’m currently building an open source laser cutter. 3D scanner is on the cards as soon as the cutter is finished.

Leave a reply to Jonathan Cancel reply